Standard Horizon CP190i, Руководство пользователя

Страница: 87 / 160

Page 88 CP190i and CPF190i
2. Move the ShuttlePoint knob to highlight
Single or Dual and press [ENT] .
WAAS 3D WAAS 3D
Figure 12.0 - Chart selection menu
NOTE
may appear on the unused window of the Dual Chart page. It happens when the GPS Chart
Plotter updates the displayed chart in the not active window. So the user understands that the GPS
Chart Plotter is busy.
12.0.0 Change Focus on Dual Chart Page
When Dual Chart is selected, you will notice one of the chart windows will have a red boarder
around it. This red boarder indicates which chart window the chart plotter has the Focus on,
meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The focus
may be changed to to the other chart window with the procedure below:
1. Press and hold
[FIND] for 2 seconds. The red boarder around the window is moved from
active window to the other.
Repeat the step 1. to move the focus from a window to another.
12.0.1 Single Chart Page
WAAS 3D
Course Over Ground
4
2
Time
1
3
Chart Scale
7
4 3 2 1
5
6
7
5
6
Distance & Bearings from Fix to Cursor
Speed Over Ground
Fix status
Time To Go
(If plotter is not navigating to a
point
will show --:-- ) TTG
Distance from Fix to Destination
(If plotter is not navigating to a
point DST will show ---.- )
Bearing from Fix to Destination
(If plotter is not navigating to a
point BRG will show --- )
o
8
8
9
Cursor Coordinates
10
9
10
Figure 12.0.1 - Example of single Chart Page