manualshive.com logo in svg

Standard Horizon CP190i, Руководство пользователя


Поделиться
Скачать
background image

Page 108

CP190i and CPF190i

Arrival Alarm

: Alerts when the vessel is approaching  single destination point or when arriving at a leg in

a Route. Available seletions: 0.00 to 9.99NM.

XTE Alarm

: Alerts when the vessel is deviating from a defined course. Available selections: 0.00 to

9.99NM.

Depth Alarm

: Alerts when the received depth Value is lower than the selected value. Available selections:

0000 to 3000FT.

Anchor Alarm

: Alerts when the ships moves off a selected locations by a selected distance. Available

selections: 0.00 to 9.99NM.

Audible Alarm

: Enables or disables the alarm beep.

Grounding Alarm

: This function looks ahead of the vessels heading to see if a potential danger exists. When

the Grounding Alarm is enabled the GPS Chart Plotter will draw a triangle in front of the vessel
on the Chart page showing the area that is being searched as shown below. The depth and
range (distance) of the area the GPS Chart Plotter looks ahead for a shallow area can be set
using this function.

Grounding Alarm Range

: This function allows setting the distance of the grounding alarm zone (the length of the sector

to be detected) among the 0.25, 0.5, 1.0 Nm selections. When a depth or any of the searched
objects is found in the scanned area, a tick marker is printed on the relative box in the Grounding
Alarm Report page to identify which dangerous objects have been currently detected.

Grounding Alarm Report

: This function allows displaying a report of the dangerous objects currently detected.

The following warning appears when the Grounding Alarm is enabled.

NOTES

The Grounding Alarm function is available only if a NT

+

/MAX C-CARD is inserted. It also affects the

screen redraw speed so we suggest to disable it when not used.

When any of the objects checked are found for the first time, the GPS Chart Plotter shows a pop
up window to alert the user of the possible danger. The name of each new dangerous object found
is reported in the warning window. In the Grounding Alarm Report page  the relative item has a tick
marker next to it, to identify the dangerous object currently detected. If in the next search cycle the
same objects are found again, the alarm window will not be shown. Instead, if in the next searches
the objects found before are no longer detected, their relevant item in the Grounding Alarm Report
page is cleared (note that in this case, if the same object type is found again later, the Alarm will
be shown). The GPS Chart Plotter shows an icon on the charts that identifies when a Grounding
Alarm is detected.

Figure 13.3 - Grounding Alarm

13.4 SIMULATION

The built-in Simulator function allows you to become proficient in the use of the GPS Chart
Plotter, see the Simulation menu below:

Simulation Mode

: Three selections:

a. Off - turn the simulation mode Off
b. On - enable the simulator mode, where the speed and course are adjusted by

entering in values in the Course and Speed selection discussed later in this table.

Содержание CP190i

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP190i

Eagle CUDA 240 S Installation And Operation Instructions Manual preview
CUDA 240 S
Бренд: Eagle Страницы: 140
Raymarine Echonav 730 User Manual preview
Echonav 730
Бренд: Raymarine Страницы: 50
Raytheon V820 Instruction Manual preview
V820
Бренд: Raytheon Страницы: 86
Furuno DFF3-UHD Installation Manual preview
DFF3-UHD
Бренд: Furuno Страницы: 16
NorthStar EXPLORER 467 Dimensions preview
EXPLORER 467
Бренд: NorthStar Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды