Standard Horizon CP190i, Руководство пользователя

Страница: 38 / 160

CP190i and CPF190i Page 39
LANGUAGE Allows changing the language for menus and data screens.
AUTO INFO When the cursor is moved over a buoy, Mark or other item a popup window will show
information of the item. This menu item allows the window to be turned Off,
On Points
(default) or On All .
Auto Info OFF Auto Info ON POINTS Auto Info ON ALL
CURSOR WINDOW By default when the cursor is moved a window is shown with the Lat/Lon Distance and
Bearing from the vessels location to the cursor. This selection allows the window to be
turned On (default) or Off. The Cursor Window is automatically disabled when General
is set in Windows Setup option.
Cursor Window ON Cursor Window OFF
CURSOR POSITION The position of the cursor can be customized so it is centered in the middle (if Center
selected) or centered on the bottom of the Chart page (if Bottom selected, default).
COG TIME LINE It is a line projected from the ship icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10 (default), 30 minutes, 1, 2 hours and infinite.
NOTE*
The available Units of Measure for Distance are: Nm, Sm, Km, Nm+Ft, Nm+m. Note when “Nm+Ft”
is selected if the distance is less than 1.0 Nm, it turns to Feet. When “Nm+m” is selected if the
distance is less than 1.0 Nm, it turns to Meters.
3.7 ABOUT PAGE
From Main Menu page it is possible to select the About page containing Software, Chart and
optional devices information.
1. Press
[MENU] , move the ShuttlePoint knob to highlight SETUP MENU and press [ENT] .
2. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the
ShuttlePoint knob to the right.
3. The Information page appears on the screen (see the following picture).