Standard Horizon CP190i, Руководство пользователя

Страница: 74 / 160

CP190i and CPF190i Page 75
Figure 9.2 - Olympic Route creation (1)
6. Then move the ShuttlePoint knob to the last Waypoint and press [ENT] .
7. Move the ShuttlePoint knob to highlight OLYMPIC and press [ENT] . A line joins the
starting Waypoint and the last Waypoint.
Figure 9.2a - Olympic Route creation (2)
9.3 MAKING ADDITIONAL ROUTES
To create another Route the GPS Chart Plotter must be told that you want to create a second
Route.
1. Press
[MENU] , move the ShuttlePoint knob to highlight USER POINTS and press
[ENT] .
2. Move the ShuttlePoint knob to highlight ROUTE and press [ENT] .
3. Move the ShuttlePoint knob to highlight SELECT and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to an open Route number example Route 2.
5. Press
[ENT] or move the ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart Page is shown.
7. To create the new Route, follow the steps in Creating a Route using Waypoints or Marks
sections.
9.4 CREATING A ROUTE USING MARKS ON THE CHART PAGE
To create a Route containing Marks you first must create the Marks and show them on the
Chart Page.
1. Move the ShuttlePoint knob over the top of a Mark that you wish to be the starting point
in the Route and press [ROUTE] .
2. Next move the ShuttlePoint knob until the cursor is over the Mark that you want to be
the next leg in the Route.