SRC RANGER 4000 S, Инструкция по установке и устранению неисправностей

Страница: 7 / 60

Ranger S Installation and troubleshooting
5
Chapter 2: System Installation
Mounting the Controller
Though the Ranger 4000 S is designed to resist both rain and direct sun
light, you should place it in a friendlier environment if possible. Installing
the Ranger 4000 S inside a utility room or a shed is the perfect solution, but
if this is not possible, try to place it somewhere dry and out of sight.
Furthermore, make sure that you place the controller in a location that
meets these requirements:
• The controller must have access to 230 VAC.
• You must be able to connect all cables to the controller at the
location.
To minimize electromagnetic interference, make sure that the controller is
placed at least 4,5 m away from any high‐draw motors like air conditioners,
refrigerators, pool pumps etc.
3 Use a pen to put marks on the wall through the hole in the back of
the controller cabinet.
4 If you're placing the controller on a concrete wall, take down the
controller, drill out the hole, put in the wall anchor, and put back the
controller on the wall.
5 Fasten the screw in the wall through the holes in the back of the
controller cabinet.
Now the controller should be mounted firmly on the wall. After mounting
the controller, it's time to connect the power and connect boards ‐ follow
the instructions in the next section to do this.