SRC RANGER 4000 S, Инструкция по установке и устранению неисправностей

Страница: 22 / 60

Ranger S Installation and troubleshooting
20
3 Use the item selectors to select
2. Rain
and push the
ENTER
button.
Now the display looks like this:
4 Now you can choose between three settings:
Rain gauge (Pulses)
If your rain sensor provides dynamic data in the sense that it sends a pulse
for each unit of rain it detects, select
Pulses .
Rain contact (N/O or N/C)
If your rain sensor simply tells the controller whether to irrigate or not (if
it's raining or not), you need to tell the controller if the input is normally
open or closed. Whenever the device is in the opposite mode, the
controller will not irrigate.
Disabled
Don't use the Rain input.
Use the item selectors to locate the setting you want and if you chose
anything but Rain gauge (Pulses) , push the ENTER button to save your
selection and the SENSORS button to exit sensor configuration.