Ranger S Installation and troubleshooting
32
ActualFlow = K * ( Offset)
About the two values you need to enter:
• The "Offset" value is to correct the input from your sensor.
•
• The "K" value can be looked up in the data sheet for your sensor.
4
Use the
item selectors
to enter your values and push the
ENTER
button to save your settings.
Setting the Flow Sensor Adjustment
If you want to calibrate your flow sensor, you can use the sensor
adjustment to multiply the values from your sensor with anything between
0.00 and 9.99.
This comes in handy if you have a standard sensor that behaves slightly
different than the built‐in profile calculates.
Adjusting the flow sensor input
1 Turn the dial to
ADVANCED
, use the
item selectors
to scroll to item
number
3. FloGuard
, and push the
ENTER
button.
Now you'll see this display:
Содержание RANGER 4000 S
Страница 58: ...Ranger S Installation and troubleshooting 56...
Страница 59: ...Ranger S Installation and troubleshooting 57...
Страница 60: ...Ranger S Installation and troubleshooting 58...