SPM leonova emerald, Руководство пользователя

Страница: 80 / 170

C:8
Measurement techniques always included
B C
Temperature measurement with default file
The default file for temperature measure-
ments is located in the ‘User defined’ window
(1). There are no settings under ‘Measuring
point data’.
The result is displayed with a decimal, but
please note that the accuracy of the SPM
laser tachometer/IR temperature probe is
± 2.5°C.
The change from °C to °F is made under
‘General settings’ (2) in the SETTINGS win-
dow. Switching from one unit to the other
will re-calculate all saved results and display
them in the active unit.
After pressing the measure key (M/S) you
can select type of material (3) to obtain as
accurate readings as possible.
Select material to be measured (emissivity)
with RIGHT/LEFT arrow keys:
- Paint
- Black body
- Iron rusted
- Iron oxidized
- Aluminium unoxidized
- Aluminium oxidized
- Lead oxidized
- Brass polished
- Brass oxidized
- Copper rough polished
- Copper black oxidized
Press F1 ‘Continue’ or ENTER to stop read -
ing. Save the result with the M/S key.
To see or delete measurement(s) before sav-
ing, press F1 ‘Measuring result’ (4) to see the
result window. Press SHIFT+F2 to set a de -
fault comment or link a voice recording to the
result. See Chapter B, Comments. Press F2 to
go to graphics (see Chapter B, Graphics)
To save the result, press MENU and select
‘Save as’. Select ‘Save a file’ and input a
name via the keyboard window. Press ENTER
to save.
For manual input of temperature, press
ENTER and input the temperature via the
keyboard window.
4
1
2
3