SPM leonova emerald, Руководство пользователя

Страница: 44 / 170

B:10
General measurement functions
B
For efficient, systematic condition monitoring, Le-
onova is used as a data logger. Measuring points are
set up in Condmaster and downloaded to Leonova,
complete with all input data for any or all of the
supported measuring techniques. For instructions,
see the ‘Working with Condmaster Ruby’ user guide.
Downloaded measuring rounds are placed in the FILE
window (1). To measure, mark the file and press the
ENTER key to open (or press MENU > ‘Open’ (2)).
Measuring rounds cannot be renamed in Leonova,
because Condmaster needs the original round name
as an identifier.
After uploading a measuring round back to Cond-
master, it can be deleted from Leonova (3). If you
keep it in the instrument, it will be overwritten next
time you download the same measuring round from
the PC.
Components and measuring points in downloaded
measuring rounds are shown in the order they were
arranged in Condmaster. All the operator has to do
is connect the appropriate transducer and use the
Leonova MEASURE/SAVE (M/S) key to obtain and
save the measurements.
In Condmaster, the components and measuring points
contained in a measuring round can be organized
under labels (4) to create a logical structure and
improve measuring route efficiency.
Mark a component and press SHIFT+UP/DOWN to
move between components (5) and mark a meas-
uring point or label to jump to next view.
To add a technique to a measuring point, press
MENU > ‘Add technique’ (6). This technique will be
automatically saved as part of the measuring point
in Condmaster.
A new measuring point can also be added to a meas-
uring round (7). It is sufficient to name the measuring
point temporarily and select at least one measuring
technique. On uploading the round, the new meas-
uring point can be properly named and numbered.
Please note that the new measuring point will not
remain in the measuring round to which is was added.
To make it a permanent part of the measuring round,
go to the measuring round register in Condmaster
and add it.
Measuring rounds from Condmaster
1
2
3
4
6
7
5