SPM leonova emerald, Руководство пользователя

Страница: 51 / 170

General measurement functions
B:17
B
3
4
The ‘Measure all’ function
Under all measuring points in Leonova, the ‘Measure
all’ command appears above the list of measuring
assignments (1). The purpose of this function is to
speed up the execution of measuring rounds.
All types of assignments under a measuring point
are measured simultaneously with exception of
RPM measurements, user defined measurements,
assignments triggered by RPM and assignments
with post triggers.
Settings for ‘Measure all’ are made in the instru-
ment only, but are uploaded to Condmaster along
with the measuring round and saved for the next
download to Leonova.
The ‘Measure all’ function is disabled by default. It
can be activated under MENU > ‘Settings’ > ‘General
settings’ in the FILE window.
In the top section of the measurement window, a
list of measuring techniques and the current channel
configuration for the measuring point is shown (2).
Measurement using remote transducers is always
carried out separately, i.e. not concurrent with any
of the other measurements in the list.
When using a Duotech accelerometer the shock
pulse measurement occurs on channel VIB-1.
To change the channel configuration, mark the
‘Measure all’ line (1) and press the ENTER key. The
‘Channel settings’ window (3) is displayed, showing
all measuring techniques on the measuring point;
press F1 (‘Change channel) (4) to change channels.
1
2