SPM leonova emerald, Руководство пользователя

Страница: 19 / 170

A
General instrument functions
A:15
6
3
5
4
Default transducers for shock pulse and
vibration measuring techniques are set up via
the transducer register. Default transducer
is the active transducer when ‘Portable’
transducer is selected under ‘Measuring point
data’.
Press SHIFT+F3 to open ‘Settings’. Select
‘Transducers’ and press F1 (OK) to open the
transducer register (1).
Press F4 (2) to open the window ‘Default trans-
ducers’ (3). To select a default transducer for
a measuring technique, mark a technique and
press F1 (OK). Active transducer will be shown
(4).
To change transducer, press ENTER to open
the list of registered transducers (5). Mark a
name on the list and press F1 (OK) to confirm.
The new transducer is shown in the window
(4). Press F1 (OK) to confirm and close with the
BACK key.
To select default transducers for the balancing
function, mark ‘Balancing’ in the window ‘De-
fault transducers’ (3). Press ENTER and register
the transducer (6) to be used.
To see or edit transducer data, mark its name
in the transducer register (1) and press F2
‘Edit’ (7). You can edit the transducer’s data
and change the transducer name. Mark a line
in the register with the arrow keys, open the
keyboard with ENTER and edit the data. Press
F1 to save the settings and close with the
BACK key.
When standing in a measuring round, you can
press SHIFT+F4 to jump to the default trans-
ducer setting which can be useful if you need
to change default transducer for a measuring
point.
2
7
1
Default transducers