SPM leonova emerald, Руководство пользователя

Страница: 49 / 170

General measurement functions
B:15
B
Measurement window before measuring
The measurement window has three parts, the result field (A), the measuring point field (B) and the
function bar (C). Their contents differ, depending on the type of measurement file and measuring
technique used. The figure below shows a downloaded round with the dBm/dBc technique active,
before pushing the MEAS key.
B Measuring point field
10 Component
11 Measuring point open (measuring assignments
are visible)
12 Measuring point number and name, (marked
= active)
13 Measuring point name ‘on separate line’ (re-
move under ‘General settings’)
14 Measure all measuring assignments (measur-
ing techniques) with one command
15 Measuring assignments (techniques)
16 Measuring assignment; measured and uploaded
at least once, present status in Condmaster
17 Measuring assignment, measured and up-
loaded at least once, no condition status or
no alarm limit defined in Condmaster
Open/close measuring point folders with RIGHT/
LEFT arrow keys.
C Function bar
The function bar shows actions controlled through the function keys F1 to F4. The functions available
will vary with different modes. The SHIFT key is used to provide alternate functions in the function bar.
A Measuring result field
1 Measuring point icon
2 Measuring point number
3 Measuring point name
4 Active measuring technique
5 Measuring result saved for this technique;
No = blue box, yes = blue check mark ,
not measured = white box, measurement
aborted = grey check mark
6 Measuring point status when last measured
7 Alternatives for measuring point status
after measurement
8 Unit of main measuring result
9 Additional measurements yes - no, e.g.
transducer line quality, spectrum etc.
1
3
7
10
5
15
2
16
A
9
B
4
6 8
14
17
C
13
11
12