SPM leonova emerald, Руководство пользователя

Страница: 141 / 170

E
Vibration measurement
E:19
Measurement results
Press the M/S key to measure or F1 ‘Measure
all’ for a measurement in a round. If the rpm
assignment is set up with ‘Pseudo Tac’ in
Condmaster, this will automatically be acti-
vated and indicated together with the rpm (1).
The ‘Pseudo Tac’ function is described in the
CondmasterUser Guide.
The live spectrum display (2) in the ‘Meas -
uring’ window can be changed to show time
signal by pressing Shift+F1.
After measuring vibration, Leonova will
display three main condition parameters:
DISP, VEL and ACC as (RMS), (Peak) or (Peak
to Peak). Units for the displayed parameters
are selected under ‘Time signal unit’ when
defining the assignment under ‘Measuring
point data’ (SHIFT+F3).
The status dots (3) are grey because there are
no evaluation criteria for EVAM assignments
set up in Leonova.
Press F1 to see the full list of condition param-
eters (4) in the measuring result window.
To delete a measuring result, press F1
(previous) or F2 (next) to select result and then
press F3 to delete.
3
4
1
2