Operator
’s Manual – Spider CROSS LINER
45 / 64
5.5 GEOMETRY ADJUSTMENT
GEOMETRY CHECK
The geometry is adjusted mechanically. The mower operator evaluates whether the geometry needs to be adjusted
or not.
GEOMETRY ADJUSTMENT
If you do not have the necessary equipment and experience, have the work done by a specialized service center.
1)
Hold down the skid-steering switch button so that the
wheels slightly deflect, then release the button - the
wheels return to the initial adjustment position.
2)
Turn off the main switch and the CENTRAL STOP on
the mower.
3)
Raise the mower and support it so that the wheels are
clear off the ground.
4)
Loosen the 3 screws on the portal (see picture).
5)
Place the straight lath on the wheel portals on the left
and right side and adjust the wheels so that they are
parallel.
6)
Then tighten the screws.
7)
The machine is ready for use.
SKID
STEERING
SKID
STEERING
Figure 13
– Geometry check
