![SPIDER X LINER Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/spider/x-liner/x-liner_operators-manual_1347293034.webp)
Operator
’s Manual – Spider CROSS LINER
34 / 64
OPERATION IN DUSTY OR SANDY AREAS
•
Check the air filter regularly, clean or replace the relevant parts as needed, regardless of the inspection
interval.
•
Tighten the hydraulic tank filler cap tightly to prevent sand and dust from entering the hydraulic system. See
•
Check for dirt accumulation in the engine and exhaust compartment.
OPERATION ON WET OR SOFT TERRAINS
•
Clean the mower. Moisture or dirt can damage paint, electric and hydraulic lines or metal parts. When
operating the mower, keep it as dry as possible and lubricate the mower regularly.
•
Check for dirt accumulation in the engine and exhaust compartment.
3.11 RERUELING THE MACHINE
ATTENTION
Spilled fuel can cause an accident. Clean all spilled fuel immediately. Do not use fuel to clean the
mower. Choose a well-ventilated area to refuel.
WARNING
Fuel is flammable, so protect the fuel system from open flames. If you suspect a fuel leak, stop the
engine immediately. Do not smoke when refueling or working on the fuel system.
WARNING
Do not refuel while the engine is running. Failure to observe these precautions may result in a fire or
injury.
WARNING
Turn off your mobile phone before entering a potentially explosive environment. Sparks in such areas
could cause an explosion or fire resulting in serious injury or even death.
NOTE:
No liability will be assumed in the event of equipment failure caused by the quality and type of fuel used.
See also:
LIQUIDS, LUBRICANTS AND FILLING VOLUMES
. If you use the wrong type of fuel or fuel that is dirty,
the fuel system may get damaged.
Always fill the fuel tank at the end of the work shift. This will prevent condensation on the tank walls.
FILLING THE FUEL TANK
1) Secure and turn off the mower engine by pressing the CENTRAL STOP.
2) Remove any unwanted material from around the fuel cap.
3) Remove the fuel cap.
4) Add fuel with the filler neck as required.
5) Install the fuel cap. Make sure it is properly tightened.