SPIDER X LINER Скачать руководство пользователя страница 19

Operator

’s Manual – Spider CROSS LINER 

 

19 / 64 

 

3  OPERATION 

The aim of this handbook is to guide the operator get familiarized, step by step with the use of the mower so that it 
can work efficiently and safely. 

Read the OPERATION chapter from start to finish.

 

The operator must always have an overview of events taking place in or around the mower. Work safety is the 
most important factor when working with the mower. 
Before using the mower, first verify your ability to operate the mower on a sufficiently free and spacious area. Learn 
to perfectly control the movement around the area, around bushes, trees and other terrain elements and obstacles. 

 

The user / 

operator is the person responsible for the safety

 of persons located in or entering the 

working area of the mower. When any person enters the work area, interrupt the work. The user / 
operator is 

responsible for any damage caused to third parties

 when operating the mower.  

The mower may be used to work on slopes that are inclined as described in th

ABOUT THE PRODUCT > USE 

OF THE MOWER

 when the ground is dry. If the ground is wet or damp, the slope on which the mower is moving 

should not exceed 20

°. 

Before operating the mower for the first time, each owner is obliged to ensure the general training and practical 
skills training of his / her staff - the operators in the control of the mower. General training and practical skills 
training will be carried out by the sales representative - the product specialist of the mower supplier when put into 
operation 

 
Remember: 
• Be careful. 
• Be alert. 
• Work safely. 
 

3.1  WORK SAFETY 

Before using the mower, the operator is required to undergo practical training in operating the mower. Read this 
instruction manual carefully, become familiar with the safety instructions and basic maintenance of the mower. 
Always practice your mower skills until you are familiar with the controls and mower's behavior. A well-prepared 
operator can work safely and efficiently with the mower. Behavior of unprepared and inexperienced operators can 
be dangerous. Do not threaten yourself or the lives of other people with irresponsible behavior.  

 

Fuel

 

Fuel is flammable, so protect the fuel system from open flames. If you suspect a fuel leak, stop the engine 
immediately. Do not smoke when refueling or working on the fuel system. Do not refuel while engine is running. 
Wipe any spilled fuel as it may cause a fire. Failure to observe these precautions may result in fire or injury. 

 

WARNING 

Do not operate the mower there is less than 20% fuel in the tank. 

 

Mower condition 

A damaged mower can cause injury to you or others. Do not operate the mower that has damaged or missing 
parts. Ensure that the maintenance procedures outlined in this manual are performed before using the mower. 

 

WARNING 

Do not step in or reach under the mower if it is raised and not properly supported.

 Before starting 

work, test the safety shut-off features on the mower. 

 

Mower performance limits

 

Exceeding the suggested limits may damage the mower and cause injury during operation. Do not exceed the 
specified limits when working with the mower. Do not attempt to improve performance of the mower with 
unapproved modifications. 

 

Engine / steering failure

 

If there is a fault in the engine or steering, stop the mower as quickly as possible. Do not operate the mower until 
the fault has been corrected. 

Содержание X LINER

































































Отзывы: