Operator
’s Manual – Spider CROSS LINER
42 / 64
5.3 VERTICAL SERVICE POSITION
It is possible to place the mower in a vertical service position for cleaning and maintenance of the mower deck.
It is only allowed to turn the mower into this position on a firm and level surface for the time necessary for service.
It is forbidden to park the mower in the vertical service position. It is forbidden to use the height of cut
lever while in this position.
PROCEDURE:
1) Place the mower on a level and solid surface.
2) Rotate the wheels so the portals are aligned with the winch drum.
3) Switch off the mower using the CENTRAL STOP button and remove the key from the CENTRAL STOP.
4) Check the fuel tank cap and engine oil dipstick for tightness.
5) Turn off the fuel valve (If you do not take these precautions, you may be injured or killed.)
6) Set the cutting height to the lowest level - service position.
7) Pull the winch guide towards you. It will partially eject. This gives you a larger lever to turn the machine into
the service position. See also: ABOUT THE Mower> DESCRIPTION> LOCATION OF MAIN
COMPONENTS
7
8) Lift the mower on the winch side by the winch guide until the mowing height handle rests on the ground.
Obr
ázek 7 – Poloha skeletu žacího ústrojí
při servisní poloze
Obr
ázek 8 – Poloha skeletu žacího ústrojí
při servisní poloze
