Sperry Marine Rudder Angle Indicator System, Руководство по эксплуатации, установке и обслуживанию

Страница: 86 / 116

Index:
Erstellt: 06/17
2017-07-03 installation instructions rudder angle indication systems.docx
Page 4
Zero adjustment:
At the back of the indicator is a
small “screw”. Turn gently with a
well-fitting screwdriver to left or
right (max +/-30°) to adjust the
pointer to zero on the scale.
Span adjustment :
At the back of the meter is a small blue potentiometer.
This is intended for the adjustment of the span of the meter.
Apply the signal and turn this pot to set the pointer on the desired
position.
Terminals:
The instrument has four terminals for input
1
= + signal
2 = - signal
11 = illumination
12 = illumination.
The illumination has no preferred polarity.
The min/max wires sizes are 0,14-2.5 mm
2
(26-14 AWG).
For solid or flexible wire.