Spectra Watermakers LB-20000, Инструкция по установке и эксплуатации

Страница: 36 / 65

36
Manual Operation continued….
Fresh Water flushing— To flush the system;

Open the pressure relief valve and Stop the watermaker

close the feed valve

Confirm the Brine discharge valve is pointing up (to drain)

Open the Flush valve
10. Flip the toggle switch to SERVICE
11. Allow the system to flush until the brine discharge is <1000ppm salinity (about 5
minutes). You can check this by holding a container under the brine discharge service
port and cracking the Brine discharge valve.
Note; When the system has been flushed with fresh water it should be run and /or re-
flushed at least every 5 days.
Brine discharge
valve
Brine discharge
service port
Feed Valve
Flush valve