Spectra Logic T-Series Spectra T200, Руководство пользователя

Страница: 94 / 110

Chapter 9 – Replacing the Transporter
94
c.
Finger-tighten the knurled nut (see Figure 9-10 on page 80) on the left side of
the fan assembly to secure the assembly to the chassis.
Install the Front Panel
1. Grasp the left and right edges of the front panel and lift it into position on the front
of the chassis.
a.
Align the cutouts for the touch screen and the TAP with the front of the library.
b. Insert the alignment pin on the bottom edge of the front panel into the
corresponding hole in the bottom edge of the chassis.
c.
Fit alignment pin on the top edge of the panel and the two nuts extending from
the back of the front panel (Figure 9-27) into the corresponding holes on the
edges of the chassis.
Note:
Make sure that the power button fits into the cutout in the front
panel and that the front panel is flush against the front of the
chassis.
Figure 9-27 Install the front panel on the chassis.
Alignment nut on
front panel
Chassis