background image

Safety Instructions

Safety Instructions

Safety Instructions

 

 

 

These units should be placed on a level surface.  Failure to do so can result in poor product performance or create a 
possible safety hazard.  This unit should be securely anchored to a wall or floor with suitable fasteners, which are not 
included.  Do not use this unit for anything other than the manufactures intended purpose.  

DO NOT STAND ON ANY 

PART OF THE UNIT, OR USE IT AS A LADDER.

  Evenly distribute the weight on each level and always keep the 

heavier loads on the bottom.  Use care when working with metal parts. 

Heavy Duty 3’ 
1 Drawer Work Bench 

MODEL NUMBER 

 

URWB - 3 

URWB 

URWB 

URWB 

-

-

-

 3   3 Shelf   1 Drawer 

 3   3 Shelf   1 Drawer 

 3   3 Shelf   1 Drawer 

-

-

-

 72”h x 18”d x 36”w

 72”h x 18”d x 36”w

 72”h x 18”d x 36”w

 

 

 

Description 

 

Top Back Post Right 
Top Back Post Left 
Bottom Back Post 
Front Post 
Braces 
Beams 
Left Top Support Extension 
Right Top Support Extension 
Top Shelf Flat Beam 
Left Drawer Mount 
Right Drawer Mount 
Left Drawer Slide 
Right Drawer Slide 
Front Drawer Shelf Brace 
Back Drawer Shelf Brace 
Steel Peg Board 
Laminate Shelves 
Laminate Drawer Shelf 
Laminate Top Shelf 
Nuts, Bolts, Washers 
Handle 
Wall Anchor 
Post Connector 

Qty. 

 























Part Number 

 

RUPTSPR3702S 

RUPTSPL3702S 

RUPTSP3802S 

RUPT3502S 

RUBE1702 
RUBE3502 

RWTE0902L 

RWTE0902R 

RMBE3502 

SVRWDM1705L 

SVRWDM1705R 

SVRWDS1403L 

SVRWDS1403R 

SVRWDB3102F 

SVRWDB3102B 

SPGBD1536 

RPB21836LM 
RPB31011LM 

RPB2369LM 

NB8 

HDL1000 

N/A 
N/A 

Part Size 

 

36” 
36” 

38 3/8” 

35” 
18” 
36” 

9” 
9” 

36” 

N/A 
N/A 
N/A 
N/A 

31” 
31” 

15 3/4” x 36” 

18” x 36” 
11” x 31” 

9” x 36” 

N/A 
N/A 
N/A 
N/A 

General Instructions

General Instructions

General Instructions

 

 

 

Assembly is done with the rivets of the beams and braces fitting into the slots of the post.  A rubber mallet may be used 
on the beams and braces to seat the rivets properly.  A hammer can also be used, providing one uses a cloth or a block 
of wood between the hammer head and the parts to prevent damage.  Tap gently and be sure the rivets are straight and 
fully engaged. 

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel 

free to contact our Edsal manufacturing facility at,  (773) 475-3000 and request customer service.  We can 

also be reached on the internet at the following email address : [email protected]

 

To obtain replacement parts, please provide the following information : 

 

- Model #    - Part # & Description    - Location Purchased    - Date Purchased 

Consumer Products Division 
Edsal Manufacturing Company 

4400 South Packers Avenue 
Chicago, IL 60609     www.edsal.com 
 
MADE IN CHINA 

 

Required Tools

Required Tools

Required Tools

 

 

 

- Rubber Mallet 

Отзывы: