Spectra Logic T-Series Spectra T200, Руководство пользователя

Страница: 37 / 110

Replacing the Drive
37
6.
While supporting the bottom of the drive sled, pull outward on the drive sled
handle to remove the drive from the library (Figure 4-5).
Caution:
The drive sled weighs approximately 15 lb. (7 kg). Be careful
not to drop it.
7.
Set the drive aside for return to Spectra Logic.
8.
Slide the new drive into the empty drive bay. Push the drive in until an audible click
indicates that it has locked into place.
9.
If necessary, reconnect any cables you disconnected from the drive in Step 2 on
page 36
10.
Return to the Feedback Required screen displayed on the user interface (see Step 5
on page 35) and select
OK
.
The library powers on the new drive and begins the process of configuring it. A
window displays showing the progress.
When the configuration is complete, the Drives screen refreshes to show the new
drive functioning in the old drive’s location. The new drive assumes the old drive’s
configuration, so it can be used immediately.
11.
Package the malfunctioning drive and ship it to Spectra Logic as described in
Chapter 10 – Returning Components on page 101.
Figure 4-5
Removing the drive sled from the library.