Specialized LEVO SL COMP, Руководство пользователя

Страница: 26 / 193

24
ENGLISH
FRANÇAIS
DEUTSCH
ČESKY
HR
VA
TSKI
SLOVENŠČINA
All models are assembled with the Flip Chip in the Low position. Switching to the High position
raises the bottom bracket height by approximately 5-6mm and steepens the head tube angle by
approximately 0.5 degrees.
Place a rag between the link and the seat tube to make sure the link doesn’t make contact with the
seat tube.
„
Remove the upper shock eye bolt and the two extension bolts, then remove the extension/shock assembly from
the bike.
„
Remove the lower shock eye bolt, then remove the Flip Chip halves out of the lower shock eye.
„
Rotate the Flip Chip halves 180 degrees then push them back into the lower shock eye.
„
Assemble the rear shock eye to the extension and install the bolt (do not torque at this time).
„
Install then torque to specification the upper shock eye bolt and the two extension bolts.
„
Torque the lower shock eye bolt to specification.
11.3 FRAME/BIKE CUSTOMIZATION:
Levo SL frames are available in a 29”configuration, with different wheel/tire and/or fork options. Each of these variables
will affect the bottom bracket height and head angle of the frame, as well as the general ride characteristics of the bike. If
you decide to make changes to the stock configuration, e.g. changing the tire size or fork travel, please check with your
Authorized Specialized Retailer what components, if any, need to change for compatibility.
WARNING! Changing the frame configuration can alter the BB height and/or the head tube angle,
which can have negative effects on the bike’s handling characteristics and ride quality. In certain
cases, it can also result in frame/shock incompatibility. Please refer to your Authorized Specialized
Retailer before making any modifications to the wheel/tire size, shock, shock extension and/or
fork length.
MAXIMUM FORK LENGTH AND TIRE SIZE:
WHEEL SIZE MAX FORK TRAVEL MAX REAR TIRE SIZE CHAINRING SIZE
29” 150mm 27.5 x 2.8 or 29 x 2.6 30 - 34t
2
WARNING! Specialized frames are compatible ONLY with forks that have a specific range of travel
(see table). Use of different styled forks or forks with longer travel may result in catastrophic
failure of the frame which may result in serious personal injury or death.
2
With the chainguide removed, a 36t chainring can be used.
WARNING! While the 29 frame is generally compatible with tires up to 27.5 x 2.8 or 29 x 2.6, tire
dimensions can vary depending on the manufacturer, and not all forks are designed to accept a
larger tire. Always check with the fork manufacturer regarding required clearances.
11.4. BOLT SIZE / TOOLS / TORQUE SPECIFICATIONS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important
for your safety. If too little force is applied, the fastener may not hold securely. If too much force is
applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening
force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and
consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components.