DPU/DO - Page 8 - REV. 5/25/00
The face of the Diagnostic Unit is shown below. The left side consists of a numeric keypad area
that is outlined for ease of numeric entry. This is the area that is used for parameter selection in
the diagnostic operations and remote aisle selection when the unit is in hard-wired remote mode.
The right side of the keypad contains special function keys. The individual uses of these keys
will be described in detail in the following sections of this manual.
--------------------------------------------------------------
TEST
REMOTE
STOP
MOVE
RESET
1
2
3
4
5
6
7
8
9
0
CLEAR
LOAD
SAVE
HELP
ENTER
ESCAPE
NEXT
LAST
UP
DOWN
--------------------------------------------------------------
-- DIAGNOSTIC UNIT KEYPAD --
Above the keypad, the display consists of an eight line by 32-character LCD panel where all
system status is provided along with the user interface questions and prompts. The display
contrast has been preset at the factory. This display contrast may be adjusted by holding down
any key while powering up the unit. This action sends the user to the screen adjustment area
where the display contrast may be changed. This and other functions will be discussed in more
detail in the following sections.
Do not store the diagnostic unit below freezing temperatures 0
°
C (32
°
F). For best results
operate unit at room temperature.
The Diagnostic Unit should be kept clean. Dish washing liquid and a soft cloth will suffice for
this purpose.
Do NOT use solvent type chemical cleaners on the keypad or window.
