55
Reg.
Range Units
Default
Definition
S33
0-255
ASCII
19(19h)
XOFF Character.
S34-35
Reserved.
S36
7 (07h)
LAPM Failure Control
S37
0
Line Connection speed
NOTE: Desired sub-V.34 line connection speed. If an invalid number is entered, the
number is accepted into the register, but S37 will react as though the default value has
been entered. See the +MS command for more modulation selections.
Bits 0-4:
0 =
Attempt auto mode connection (DEFAULT)
1-3 =
Attempt to connect at 300bps
4
=
Reserved
5
=
Attempt to connect at V.22 1200bps
6
=
Attempt to connect at V.22bis 2400bps
7
=
Attempt to connect at V.23
8
=
Attempt to connect at V.32/V.32bis 4800bps
9
=
Attempt to connect at V.32/V.32bis 9600bps
10
=
Attempt to connect at V.32bis 12Kbps
11
=
Attempt to connect at V.32bis14.4Kbps
12
=
Attempt to connect at V.32bis 7200bps (ATF7)
Reg.
Range Units
Default
Definition
S38
0-255
seconds
20
Delay Before Forced Hangup.
S39
Bit Mapped
3
Bit Mapped Registers.
S40
Bit Mapped
105(69h)
Bit Mapped Registers.
S41
Bit Mapped
3
Bit Mapped Registers.
S46
136 or 138
138
Data Compression Control.
NOTE: 136 enables error correction with no compression; 138 enables error correction
WITH compression.
Modem Command Reference
Содержание SE14SRS
Страница 1: ...1...
Страница 2: ...2 SoundExpression...
Страница 71: ...71...
Страница 72: ...72 SoundExpression PN 9476 Rev 1 0...
