SoundExpression SE14SRS, Руководство пользователя

Страница: 32 / 72

32
SoundExpression
SYMPTOM
After data connection is established, data
is displayed as garbled characters.
POSSIBLE REMEDY
• Make sure the local (yours) and remote
modem configurations are compatible.
• Verify that both modems are operating
with the same settings, speed, data,
parity, and stop bits.
• The software may not be set for correct
terminal emulation. Configure software
to correct type. ANSI terminal
emulation is most commonly used.
• Power down your system and re-run
your communications software. Check
software settings.
• Exit the communications program and
restart it.
SYMPTOM
The modem does not answer an incoming
call.
POSSIBLE REMEDY
• You may not have enabled auto-answer.
Use your software to enable this
function. Type ATS0=1 at the command
mode screen of your data
communications application.
• If you have an answering machine, it
may be answering before the modem
can. Turn the answering machine off, or,
use the software to set auto-answer to
respond in fewer rings than the
answering machine.
SYMPTOM
Modem disconnects while on-line.
POSSIBLE REMEDY
• Check for any loose connections.
• Re-try the connection by dialing the
number several times. You may be
experiencing line interference.
• An incoming call may have broken the
connection if a call-waiting feature was
enabled. Disable call-waiting and try
again.
SYMPTOM
Speaker fails to work.
POSSIBLE REMEDY
• Make sure attached speaker is working
and conforms to necessary
specifications. See Appendix C.