56
SoundExpression
Reg.
Range Units
Default
Definition
S48
0, 7, 128
7
V.42 Negotiation.
NOTE: 0 disables negotiation and proceeds with LAPM; 7 enables negotiation; and 128
disables negotiation and proceeds with fallback action specified in S36. The default for
S36 is to attempt an MNP connection.
S82
3, 7, 128
128(40h)
Break Handling Option.
S86
0,4,5,9,12,13,14 NA
Connection Failure Cause Code.
0
= Normal disconnect; no error occurred.
4
= Loss of carrier
5
= V.42 negotiation failed to detect an error-correction remote modem.
9
= The modems could not find a common protocol.
12 = Normal disconnect initiated by the remote modem.
13 = Remote modem does not respond after 10 re-transmissions of the same
message.
14 = Protocol violation.
S91
0 to -15 dBm
10
PSTN Transmit Level.
S92
0 to -15 dBm
10
Fax Transmit Level.
S95
Bit-Mapped
0
Extended Results Codes.
NOTE: Bit values are defined as follows for S95:
0 = CONNECT CODE indicates DCE speed instead of DTE speed.
1 = Append ARQ (automatic repeat request) to verbose
CONNECT XXXX result code if protocol is other than none.
2 = Enable CARRIER XXXX result code.
3 = Enable PROTOCOL XXXX result code.
5 = Enable COMPRESSION result code.
Bits 4, 6, and 7 are reserved.
Содержание SE14SRS
Страница 1: ...1...
Страница 2: ...2 SoundExpression...
Страница 71: ...71...
Страница 72: ...72 SoundExpression PN 9476 Rev 1 0...
