SoundExpression SE14SRS, Руководство пользователя

Страница: 10 / 72

10
SoundExpression
Section Two: Installing Your
SoundExpression
This section explains how to install the
SoundExpression in your computer.
Non-Windows 95 Users
Windows 95 users may continue with
the next page.
2.1 Replacing an Existing Sound Card
1. Turn on your computer and start
Windows, go to the Main group, select
Control Panel and select Drivers. Here
you will see a list of device drivers
present in your computer.
2. Remove the sound card drivers from
the drivers list. Highlight the sound
drivers and click on “remove.” If you
are not sure which drivers are for your
sound card, refer to the
documentation that came with your
sound card or your computer system.
3. Turn off your computer and remove
the sound card from the system.
2.2 Replacing an Existing Modem
If your computer came with an internal
modem, you must physically remove it or
disable it through your computer’s BIOS
setup. Consult your computer manual’s
documentation for specific instructions.
Now, you are ready to install the
SoundExpression.
NOTE for DOS Users... You may need to
remove certain drivers from your
CONFIG.SYS file when removing
existing devices.