Sony VPD-LE100, Руководство по эксплуатации

Страница: 30 / 44

30
Connection Examples
Connecting 15k RGB/Component Equipment
Note
Switch the input signal with the INPUT-A item in the
SIGNAL SELECT menu.
For details, see page 28.
STATUS/ERROR MESSAGE
IN
PLIG IN POWER
OUT RS-
232C
RS-
422A RS-232C/422A PJ COM IN OUT
STANDBY
1
ON
@
0 0
CONTOROL S TRIG DEVICE INDEX CONTOROL
0 0
CONTOROL S
IN
PLIG IN POWER
STATUS/ERROR MESSAGE
OUT
STANDBY
1
ON
@
RS-
232C
RS-
422A
RS-232C/422A PJ COM IN
R G/G SYNC SYNC/HD VD B
OUT
TRIG DEVICE INDEX CONTOROL
:
When making connections, be sure to:
• turn off all equipment before making any
connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are
not fully inserted may generate noise. When pulling
out a cable, be sure to pull it out from the plug, not
the cable itself.
Also refer to the instruction manual of the equipment to be
connected.
Connection Examples
Connecting a BNC connector
2
Turn to the right.
1
Align the pins with the pin holes
and push in the plug into the
socket.
15k RGB/component
equipment
to RGB/component output
Monitor cable
(not supplied)
Rear
AC power cord
(supplied)
to AC inlet (front)
Signal flow
to INPUT A
(R, G, B)
to a wall outlet
(200-240 V AC,
15 A or more)