Sony VPD-LE100, Руководство по эксплуатации

Страница: 24 / 44

24
The INPUT SETTING
Menu
The INPUT SETTING menu is used to change the
settings of the input signal. Unadjustable items, which
vary according to the input signal, are not displayed in
the menu. (The following display shows an example.)
INPUT SETTING
DOT PHASE:
SIZE
SHIFT
SCAN CONV: 8
H:1 3 4 4
H:1 4 9 V: 3 7
ON
1024x768
N O . 2 3
t 2 0
INPUT-A
DOT PHASE
Adjusts the phase of the Digital Micromirror Device
(DMD)
2)
panel and the input signal.
Adjust the value to obtain the clearest picture.
SIZE
Adjusts the horizontal size of the picture.
As the setting for H increases, the horizontal size of the
picture becomes larger, and as the setting decreases,
the size becomes smaller. Adjust the setting according
to the input signal.
Use the
<
or
,
key to adjust the horizontal size.
SHIFT
Adjusts the position of the picture.
H adjusts the horizontal position of the picture, and
V adjusts the vertical position. As the setting for H
increases, the picture moves to the right, and as the
setting decreases, it moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, it moves down.
Use the
<
or
,
key to adjust the horizontal position
and the
M
or
m
key for the vertical position.
COMPONENT FORMAT
Selects the input component signal.
SMPTE/EBU-N10: Set to this position if the input
signal is the SMPTE or EBU-N10 level
component signal.
BETACAM7.5: Set to this position if the input
signal is the Betacam 7.5 level component signal.
The PICTURE CTRL Menu/The INPUT SETTING Menu
...........................................................................................................................................................................................................
1) NTSC
4.43
is the color system used when playing back a video recorded in NTSC color system on a NTSC
4.43
system VCR.
2) The Digital Micromirror Device (DMD) is the core device of Texas Instruments’ Digital Light Processing (DLP)
technology.
Input signals and adjustable/setting items
Item
CONTRAST
BRIGHT
COLOR
HUE
SHARP
D. PICTURE
COLOR
TEMP
COLOR
SYS
GAMMA
MODE
FILM
SET UP
COMPONENT
FORMAT
Y : Adjustable/can be set
N
: Not adjustable/cannot be set
*1 Can be displayed when the optional IFB-12A or IFB-
1000 interface board is attached.
*2 Monochrome signal is not adjustable/cannot be set.
*3 Only NTSC
3.58/4.43
1)
signal is adjustable/can be set.
*4 Progressive component signal is not adjustable/cannot be
set.
*5 Only 525/60 signal is adjustable/can be set.
*6 Only 15 k RGB (60 Hz) signal is adjustable/can be set.
*7 Only NTSC
3.58/4.43
signal and PAL-M signal are
adjustable/can be set.
Input signal
Video/
S video
*
1
Y
Y
Y * 2
Y
*
3
Y
Y
Y
Y
Y
Y *
7
Y *
3
N
15k
RGB
Y
Y
Y
Y
Y
N
Y
N
Y
Y
*
6
N
N
Compo-
nent/
Progressive
component
Y
Y
Y
Y
Y
Y
*
4
Y
N
Y
Y *
5
Y *
3
Y
RGB
(preset)
Y
Y
N
N
N
N
Y
N
Y
N
N
N
RGB
(preset)
(HDTV,
DTV)
Y
Y
Y
Y
Y
N
Y
N
Y
N
N
N
RGB
(not
preset)
Y
Y
N
N
N
N
Y
N
Y
N
N
N