Sony VPD-LE100, Руководство по эксплуатации

Страница: 22 / 44

22
Using the Menu
The projector is equipped with an on-screen menu for
making various adjustments and settings.
Unadjustable items are not displayed in the menu.
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in
yellow.
PICTURE CTRL
CONTRAST:
BRIGHT:
COLOR TEMP: 80
50
6500
GAMMA MODE: 2.2
INPUT-A
2
Press the
M
or
m
key to select a menu, then press
the
,
or the ENTER key.
The setting items of the selected menu are
displayed.
SET SETTING
STATUS:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
1
1
C. BLACK: O F F
ON
ENGLISH
1
OFF
FRONT&REAR
INPUT-A
3
Press the
M
or
m
key to select the item, then press
the
,
or the ENTER key.
The adjustment menu or the setting menu (pop-up
menu) is displayed.
4
Adjust an item.
• When changing the adjustment level:
To increase the number, press the M or , key.
To decrease the number, press the
m
or
<
key.
Press the ENTER key to restore the original
screen.
• When changing the setting:
Press the M or m key to change the setting, then
press the
<
or the ENTER key.
The original screen is restored.
For details on setting individual items, see the relevant
menu pages.
Menus
Setting items
To clear the menu display
Press the MENU key. The menu display also
disappears automatically if no key is pressed for one
minute.
To reset settings that have been adjusted
Press the RESET key.
“Reset complete!” appears on the screen and the
settings appearing on the screen will be reset to their
factory preset values.
Items that can be reset are as follows:
CONTRAST, BRIGHT, COLOR, HUE, SHARP,
DOT PHASE, SIZE, SHIFT and BLANKING.
About the memory of the settings
The settings are automatically stored in the projector
memory.
Using the Menu