15
Location and Function of Controls
7
Transmission indicator
The light goes on each time a key is pressed. If the
indicator does not light, replace the batteries.
8
LIGHT button
Illuminates the key indicators when the COMMAND
switch is set to ON. If the switch is set to OFF, only
the COMMAND switch is illuminated.
If you do not press any key on the Commander for
more than 30 seconds, the key indicators turn off
automatically. The indicators also turn off if you press
the LIGHT button again.
9
MUTING keys
PIC (picture): Press to cut off the picture. Press
again to restore the picture.
AUDIO: The key does not function with this
projector.
q;
NORMAL key
The key does not function with this projector.
qa
LCD LENS CONTROL keys
Functions the same as the LENS CONTROL keys on
the control panel.
Press one of the ZOOM, SHIFT and FOCUS keys and
then the arrow keys.
qs
PATTERN key
Displays a HATCH pattern on the screen for focus,
zoom, and shift adjustments. Press again to turn off the
HATCH pattern.
qd
SYS SET (system set) key
When the PC-3000 Signal Interface Switcher is used in
the system or the system connections are changed,
press this key. This makes the projector confirm the
system construction and the settings of the interface
boards.
Note
After connecting the PC-3000 switcher and pressing
the SYS SET key, the input channel is set to SW1-1
when connecting a single switcher, or to SW1-2 when
connecting two or more switchers.
qf
INPUT SELECT keys
Selects the input signal.
VIDEO: The key does not function with this
projector.
SELECT VIDEO/S VIDEO: The key does not
function with this projector.
A/B/C/D: Functions the same as the INPUT SELECT
A/B/C/D keys on the control panel.
qg
SWITCHER/VIDEO MEMORY/INDEX select
switch
Selects the function of the SWITCHER/VIDEO
MEMORY/INDEX keys.
SWITCHER: Selects the input from the PC-3000
switcher.
VIDEO MEMORY: The position does not function
with this projector.
INDEX: Selects a projector by its index number
when multiple projectors are used.
qh
SWITCHER/VIDEO MEMORY/INDEX keys
When the SWITCHER/VIDEO MEMORY/
INDEX select switch is set to SWITCHER
When the PC-3000 switcher is connected to the
projector, press a number key (1 to 8) to select the
input from the switcher. Number key 9 does not
function.
When one switcher is connected, press the input
number key directly.
When multiple switchers are connected, press the SW
NO/OFF/GROUP key. Next press the switcher number
(1 to 8) and the input number (1 to 8) in sequence. Be
sure to press the keys one after another within 2
seconds.
e.g. To select input 4 of switcher 2, press the keys
as follows:
SW NO
t
2
t
4.
When the SWITCHER/VIDEO MEMORY/
INDEX select switch is set to INDEX
Used to specify the device or group index number.
qj
BLKG (blanking) adjustment key
Enters the blanking adjustment mode.
Next, press the
M
/
m
key to select the position to be
adjusted on the screen, and then adjust the position
using the
<
/
,
keys.
qk
RESET key
Resets the adjusted value of an item to its factory
preset value. This key functions when the menu or a
setting item is displayed on the screen.
ql
PICTURE C/– keys
Adjust the picture conditions: CONTR (contrast),
BRIGHT (brightness), COLOR, HUE and SHARP
(sharpness).
w;
VOL (volume) +/– keys
These keys do not function with this projector.
Содержание VPD-LE100
Страница 44: ...44 Sony Corporation Printed in Japan ...
