7
Location and Function of Controls
Features
Features
High brightness, high picture quality
• High brightness
The combination of a 2 kW arc Xenon lamp and Digital
Light Processing
TM
(DLP
TM
), a Texas Instruments
technology, provides superb light output of 10,000
ANSI lumen while assuring excellent uniformity on the
entire screen.
• High resolution
Thanks to use of three SXGA-resolution Digital
Micromirror Device
TM
(DMD
TM
)
panels with
approximately 1,300,000 pixels, the projector can
project the sharp picture with the resolution of 1280
×
1024 pixels.
• DRC (Digital Reality Creation)
The DRC technology allows you to obtain a finer, more
detailed picture with four-times higher density than the
conventional video picture.
• 2-3 Pull-Down technology
The 2-3 Pull-Down technology allows you to obtain a
smooth picture movement when playing back movies
or other video sources on film. To activate the 2-3
Pull-Down technology, set FILM to ON in the
PICTURE CTRL menu. (Effective for the NTSC
3.58/4.43
,
PAL-M, 15 k RGB (60 Hz) and 525/60 signals only.)
Accepts various input signals
This projector has a built-in high performance scan
converter which converts the input signals to display
the 15 k RGB, DTV, HDTV, VGA, SVGA, XGA,
SXGA and UXGA (fV = up to 75 Hz) signals as well as
the composite video
1)
, S video
1)
and component signals.
The projector accepts a wide range of HDTV/DTV
signals as shown in the chart below.
Digital HDTV signals are also acceptable when the
optional IFB-LE100 interface board is installed.
System expandability and versatility
The projector has RS-232C/422A/PJ COM interface
connectors for communication.
By combining the interface boards and signal interface
switcher (not supplied), the projection systems can be
greatly expanded. The projector also has the group and
device index functions for using multiple projectors in
one system.
Easy and flexible setup
• Sony’s original APA (Auto Pixel Alignment)
function
You can obtain the clearest picture automatically by
simply pressing the APA key when the signal is input
from a computer.
• Easy setup with external equipment
This projector has 49 preset data for input signals in
the memory. You can get a clear picture on the screen
simply by connecting equipment and pressing the APA
key. (For the signals that are not preset, adjustment
may be necessary to get a clear picture.)
• Flexible setup
The lens shift function allows you to install the
projector in a wide range of locations, without
worrying about keystone distortion (the picture going
out of square). The power focus and power zoom
functions also let you change the size of the projection
screen without having to move the projector.
Format
1035/60
I
1080/60
I
480/60P
575/50P
1080
/24PsF
1080/50
I
720/60P
720/50P
Scanning
rate (kHz)
33.75
33.75
31.5
31.25
27
28.13
45
37.5
Frame
rate (Hz)
2)
30
30
60
50
24
25
60
60
Scanning
format
2:1 interlace
2:1 interlace
Progressive
Progressive
2:1 interlace
2:1 interlace
Progressive
Progressive
Aspect
ratio
16:9
16:9
16:9/4:3
16:9/4:3
16:9
16:9
16:9
16:9
Standard
BTA S-001B
SMPTE 274M/
BTA S-001B
SMPTE 293M
–
–
SMPTE 274M
SMPTE 293M
–
..........................................................................................................................................................................................................
Over
vie
w
1) The optional IFB-12A or IFB-1000 interface board is required for displaying the composite video and S video signals.
2) Each of the frame rates is also compatible with 1/1.001.
Содержание VPD-LE100
Страница 44: ...44 Sony Corporation Printed in Japan ...
