Sony VPD-LE100, Руководство по эксплуатации

Страница: 9 / 44

9
Location and Function of Controls
Connecting the AC power cord
1
Press the lower part of the AC inlet cover ring to
remove it.
2
Pass the supplied AC power cord through the ring.
3
Insert the plug of the AC power cord into the AC
inlet, aligning the indent of the plug with the
projection of the inlet, then tighten the screw on
the plug.
4
Replace the AC inlet cover ring.
Using the carrying handles
Use the front and rear carrying handles to carry the
projector.
Caution
To avoid injury, have at least four people carry the
projector using the front and rear handles.
To put away the handles
To put away the front handle, press the two handle
release buttons beside the left and right feet of the
handle simultaneously.
To put away the rear handle, lower it.
Using the adjusters
When the projector installation location is not
horizontal, rotate the adjusters using the supplied tool
so that the projector is placed horizontally. There are
four adjusters.
Note
The supplied tool can rotate the adjuster screw in one
direction only. To rotate the screw in the reverse
direction, turn the tool upside down.
Caution
Do not turn the tool forcibly when the screw has fully
rotated. Otherwise, the tool may slip out and injure
your hand.
AC inlet cover ring
Press the lower part.
Pull out.
Pull up.
Handle release
button
Supplied tool
Supplied tool
To lower To raise
Projection