Sony VPD-LE100, Руководство по эксплуатации

Страница: 18 / 44

18
Installing the Projector
Installing the Projector
Horizontal center of the screen
Vertical center
of the screen
Installation
area
Projection
distance
Install the projector so that the tip of the lens is within this area.
The distance between the lens and the screen varies
depending on the size of the screen and the attached lens.
Use the charts for installation examples in the supplied
“Projection Distance Charts.”
Adjust the vertical and horizontal positioning of the
projector.
Vertical positioning (side view)
Screen
Adjustable range
Install the projector so that the center of the lens is
between just above the bottom edge of the screen
and the center of the screen.
You can adjust the angle of projection by performing
the shift adjustment
(page 21).
Horizontal positioning (top view)
Screen
Center of the projector
94.4 mm (3
3
/
4
inches)
Center of the lens
Install the projector so that the center of the lens is
aligned with the horizontal center of the screen.
You can adjust the horizontal position of the picture by
performing the shift adjustment
(page 21).
This section describes the installation arrangements for
installing the projector on the floor.
For ceiling installation, consult with qualified Sony
personnel. For details on installation examples with projection
distances, see the supplied “Projection Distance Charts.”
Should the lamp break, broken pieces may be scattered
around the projector. To avoid risk of injury, place a
tray to receive pieces or keep a no-go area around the
projector.
For the required space, see the figures on page 22 of
the Projection Distance Charts.