95
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Other
Use History
Select whether to display the history lists in
order to use for dialing, etc.
On:
Displays the history lists.
Off:
Does not display the history lists.
Save Setup
Saves the data for each setting to a USB
storage device. The data for each setting
saved on the USB storage device is
overwritten.
Phone Book and History data are not saved.
Load Setup
Loads the data for each setting from a USB
storage device. The data for each setting
saved on the System is overwritten.
When saving and loading settings, make sure
that the version of the system from which the
data was originally saved is the same as the
version of the local system. If the versions
differ, the data may not be properly recognized.
AMX Device Discovery
Select whether to export AMX Device
Discovery information onto the network.
Off:
Disables this function.
On:
Enables this function.
When the AMX system is connected to the
Communication System via serial
connection, AMX Device Discovery
information is output via that serial
connection.
AMX systems are external control devices
that can be used to control the
Communication System. When the AMX
system receives Device Discovery
information from the Communication
System, the System automatically falls
under the control of the AMX system.
HOP
Enter a number from 0 to 255 as the HOP
Display Terminal Name.
Auto Restore
Allows you to select whether to
automatically turn on the Communication
System if an power interruption occurs and
is then restored.
On:
Enables the Auto Restore function.
Off:
Disables the Auto Restore function.
Internet Protocol
IPv4:
Uses the internet protocol version 4
(IPv4) that is commonly used.
IPv6:
Uses the next-generation internet
protocol version 6 (IPv6).
IPv4/IPv6:
Uses both IPv4 and IPv6.
• The setting of “Internet Protocol” is common
to both LAN1 and LAN2.
• When “Internet Protocol” is set to “IPv6” or
“IPv4/IPv6”, some of the functions of this
system are restricted, and some of the
Administrator setup menus are not
displayed.
• “IPv4/IPv6” for “Internet Protocol” will be
supported in version 2.0.
For details, see “Restrictions on the Use
of IPv6” on page 104.
SIP (UC) Mode
Select whether to enable SIP (UC) mode.
On:
Enable SIP (UC) mode.
Off:
Disable SIP (UC) mode.
SIP (UC) will be supported in future version
updates.
Phone Book
Save Phone Book
Allows you to save the data in the Phone
Book on a USB storage device. The data
already stored on the USB storage device is
overwritten.
Load Phone Book
Allows you to load the data in the Phone
Book from a USB storage device. The data
already stored in the Phone Book is
overwritten.
Note
Note
Administrator7
Notes
Note
Administrator
8
