171
Using the Annotation Function
C
hap
te
r 4:
C
o
n
nec
tio
n
w
ith
O
p
tio
nal
Equ
ipm
en
t
Operations during drawing
Operate using the function keys on the tablet and the buttons on the pen.
To start drawing
Press the topmost key on the tablet.
To stop drawing
Press the second key from the top on the tablet.
To change the color
Press the lower pen button. Each press changes the color. You can select from
among black, red, blue, green, yellow, orange, purple and white.
To perform this using touch operations, place one finger on the tablet screen,
and tap to the right of that position with a second finger.
To change the line density
Press the upper pen button. Each press changes the line density. You can select
from three different line densities.
To perform this using touch operations, place one finger on the tablet screen,
and tap to the left of that position with a second finger.
To erase with the eraser
Touch the tail switch (eraser) of the pen onto the tablet and move it on the
letters or graphics you want to erase.
To perform this using touch operations, touch the tablet screen with two
fingers, and perform the operation using the balls of your fingers.
To erase all written letters and graphics
Press the bottommost key on the tablet.
To obtain the drawing rights
Normally, the drawing rights belong to the party who starts annotation. In the
case that the remote party starts annotation, the Obtain Drawing Rights button
appears and the
indicator (Drawing executed by the remote party) on
the monitor screen on the local site.
Start
Stop
Drawing Rights
Erase All
Eraser
Select Line Density
Select Color
