39
Preparing the System
C
h
apt
er
1:
In
st
al
la
tio
n
and
Pr
e
par
at
io
n
Preparing the System
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
When you dispose of the battery, you must obey the law in the relative area or country.
Most of the operations with the HD Visual Communication System can be
controlled with the supplied Remote Commander.
1
Remove the battery compartment cover.
2
Insert two size AA (R6) batteries with correct polarities into the battery
compartment.
3
Replace the cover.
Be sure to insert the batteries
E
side first. Inserting them forcibly
e
side first may
damage the insulated film covering the batteries and cause a short circuit.
Battery life
When the batteries are exhausted, the LED indicator does not light if you press
any button and the Remote Commander does not function properly. Replace
both batteries with new ones.
Notes on batteries
To avoid damage from possible battery leakage or corrosion, observe the
following:
Inserting Batteries into the Remote Commander
Note
