204
Starting a Multipoint Connection
To call remote parties not registered in the Phone Book
Basic operations are the same as those for a point-to-point connection.
For details, see “Calling a Remote Party Not Registered in the Phone Book”
on page 124.
1
Select “Detailed Dial” in the Home menu or press the CONNECT (
)
button on the Remote Commander to open the Detailed Dial menu.
2
Select “Number of Connected Sites” and select the number of the points to
which you want to connect.
The “Dial to:” text boxes that correspond to the selected number of points
appear.
3
Set up the line interface of the remote parties in the “Dial to:” text boxes.
Select the line interface from the drop-down list on the left, and enter the
number of a remote party in the text box.
For LAN connection:
Select “IP” from the drop-down list (when using the
1 connector), and enter the IP address.
For ISDN connection:
Select “ISDN” from the drop-down list, and enter
the line number.
For ISDN (Telephone) connection:
Select “TEL” from the drop-down
list, and enter the telephone number (ex. : 0390123456).
Enter all the parties with which you want to make a multipoint connection.
For details on the setup, see “Calling a Remote Party Not Registered in the
Phone Book” on page 124.
Dial to:
IP
Dial to:
IP
Dial to:
IP
Detailed Dial
Phone Book
Home
Cancel
History
2Mbps
IP
Line I/F
Communication Bit Rate
3
Number of Connected Sites
1B(64K)
Number of Lines
Dial to:
IP
Dial to:
IP
Dial to:
IP
123.123.123.1
123.123.123.2
123.123.123.3
Detailed Dial
Phone Book
Home
Cancel
History
2Mbps
IP
Line I/F
Communication Bit Rate
3
Number of Connected Sites
1B(64K)
Number of Lines
