Sony MSB-2000, Руководство по эксплуатации

Страница: 42 / 113

42
List of Menus
(
In tx-rx mode
)
C101 setup (Rx) rx_program_no 00001 to 00200 to 65535 Specifies program number for decoding.
C102 setup (Rx) rx_packet_size auto Automatically recognizes input TS packet
size.
188 Sets input TS packet size to fixed 188 bytes.
204 Sets input TS packet size to fixed 204 bytes.
C111 setup (Tx) pri_pid_base 0x0010 to 00c0 to 1ff7 Specifies the base PID for transferring
private data.
C112
*
setup (Tx) tx_umid off Disables UMID.
on Enables UMID. PID is “pri_pid_base” +0.
C113 setup (Tx) tx_line_data1 off Disables uncompressed line data
processing of 1st line.
on Enables uncompressed line data
processing of 1st line.
PID is “pri_pid_base” +1.
C114 setup (Tx) tx_line_data2 off Disables uncompressed line data
processing of 2nd line.
on Enables uncompressed line data
processing of 2nd line.
PID is “pri_pid_base” +1.
C115 setup (Tx) tx_line_base 12 to 21 Specifies the line number of the
uncompressed line. This line and the
following line can be transferred as
uncompressed lines.
C116
*
setup (Tx) tx_vanc_data off Disables ancillary data processing in the
vertical blanking interval.
on Enables ancillary data processing in the
vertical blanking interval. PID is
“pri_pid_base” +2.
C117 * setup (Tx) tx_vanc1_did 0x 00 to ff Specifies the DID for vertical blanking
interval ancillary data.
C118
*
setup (Tx) tx_vanc1_sdid 0x 00 to ff Specifies the SDID for vertical blanking
interval ancillary data.
C119 * setup (Tx) tx_vanc2_did 0x 00 to ff Specifies the DID for vertical blanking
interval ancillary data.
C120 * setup (Tx) tx_vanc2_sdid 0x 00 to ff Specifies the SDID for vertical blanking
interval ancillary data.
C121 setup (Tx) tx_vitc_data off Disables VITC private data transfer.
on Enables VITC private data transfer.
PID is “pri_pid_base” +3.
C124
*
setup (Tx) tx_udata1 off Disables getting user data1 from the UDP
port, via the MSBA-20IP.
on Enables getting user data1 from the UDP
port, via the MSBA-20IP.
PID is “pri_pid_base” +6.
C125 * setup (Tx) tx_udata1_port 05000 to 09000 to 65535 Sets the UDP port No. for picking up user
data1 from the MSBA-20IP.
C126
*
setup (Tx) tx_udata1_rate 1 to 30 Specifies rate for getting user data1 from
the MSBA-20IP.
Unit: Mbps
C127 * setup (Tx) tx_udata2 off Disables getting user data 2 from the UDP
port, via the MSBA-20IP.
on Enables getting user data 2 from the UDP
port, via the MSBA-20IP.
PID is “pri_pid_base” +7.
Item number Category Item Arguments Function