Sony MSB-2000, Руководство по эксплуатации

Страница: 38 / 113

38
List of Menus
(
In tx-rx mode
)
Item number Category Item Arguments Function
C002 setup (Rx) frame_sync_ref stream The STC obtained from the input stream is
used as the reference for SDI output.
ref_in The external analog composite input to the
REF IN connector is used as the reference
for SDI output.
Notes
• The analog reference must be a signal
such as black burst, with no amplitude
fluctuation.
• When ref_in is selected, the wordlength
for linear PCM audio samples is 16 bits.
C003 setup (Rx) sync_phase 0x600 to 800 to 9ff Specifies any hexadecimal value from
0x600 to 0x9ff, to enable fine adjustment of
the SDI output sync phase.
The adjustment range is ±18.9 µs.
C004 setup monitor_select rx Selects the decoder monitor for the monitor
output.
tx Selects the encoder monitor for the monitor
output.
C005 setup (Tx) tx_c_caption off Disables processing to transmit closed
captions as Picture user data.
on Enables processing to transmit closed
captions as Picture user data.
Note
This item is effective only when
video_system is 525.
C006 setup (Rx) rx_c_caption off Disables processing to put closed captions
transmitted as Picture user data on base
band.
on Enables processing to put closed captions
transmitted as Picture user data on base
band.
Note
This item is effective only when
video_system is 525.
C011 setup (Tx) chroma 422 This is 422P@ML.
420 This is MP@ML.
C012 setup (Tx) video_encmode IMX This IMX encoding mode is characterized
by All Intra CBG.
NORMAL This encoding mode is M=3 with Long
GOP CBR.
This yields a fixed latency, regardless of
the set bit rate.
LD This is a low delay mode, with All P Intra
slice.
NORMAL_BL This encoding mode is M=3 with Long
GOP CBR.
This yields the minimum latency,
depending on the set bit rate.