103
Simple Network Management Protocol (SNMP)
(3.1.1.11) proV1MSBstatusLpcmChannel
(Read-Only)
LPCM Channel
Displays the channels (1-2, 3-4, 1-4, 1-8) of the LPCM
audio stream being selected or decoded for
“asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)” mode.
For any other mode or for the state of “asi absent,”
displays “--------” meaning “invalid.”
(3.1.1.12) proV1MSBstatusLpcmWordLen
(Read-Only)
LPCM Word Length
Displays the word length (16, 20, 24) of the LPCM
audio stream being selected or decoded for
“asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm)” mode.
For any other mode or for the state of “asi absent,”
displays “--------” meaning “invalid.”
(3.1.1.13) proV1MSBstatusMpegCh12Mode
(Read-Only)
MPEG CH12 Mode
Displays the audio mode (last latched status) of the
MPEG audio stream corresponding to mpeg_ch12 and
being decoded for asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx
(cm) mode.
The audio mode displayed is single, dual, stereo, or
joint stereo.
For any other mode, displays “--------” meaning
“invalid.”
(3.1.1.14) proV1MSBstatusMpegCh12Rate
(Read-Only)
MPEG CH12 Rate
Displays the bit rate of the MPEG audio stream
corresponding to mpeg_ch12 and being decoded for
asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-rx (cm) mode.
The stream bit rates supported by this unit are as
follows:
96kbps, 112kbps, 128kbps, 160kbps, 192kbps,
224kbps, 256kbps, 320kbps, 384kbps
For any other bit rate, displays “--------” meaning
“invalid.”
(3.1.1.15) proV1MSBstatusMpegCh34Mode
(Read-Only)
MPEG CH34 Mode
See “(3.1.12) mpegCh12Mode (Read-Only)” above.
(3.1.1.16) proV1MSBstatusMpegCh34Rate
(Read-Only)
MPEG CH34 Rate
See “(3.1.13) mpegCh12Rate (Read-Only)” above.
(3.1.1.17) proV1MSBstatusProfileLevel (Read-
Only)
Video Profile and Level
Displays the video ES profile and level of the TS
stream being decoded for “asi_to_sdi/asi_to_sdti-cp/
tx-rx/tx-rx (cm)” mode.
The acknowledgeable Profile@Level is “MP@ML”,
“MP@HL”, “4:2:2P@ML” or “4:2:2P@HL”. For any
other Profile@Level, displays “--------”.
(3.1.1.18) proV1MSBstatusVideoEncMode
(Read-Only)
Video Encode Mode
Displays the video ES encode mode of the TS stream
being decoded for “asi_to_sdi/asi_to_sdti-cp/tx-rx/tx-
rx (cm)” mode.
The acknowledgeable encode modes are “LD All P”
“LD ALL I” “LD IPPP” and “LONG”.
For any other type, displays “--------”.
(3.1.1.19) proV1MSBstatusVideoRate (Read-
Only)
Video Rate
Displays the mesured input video rate of the TS stream
being selected or decoded for “asi_to_sdi/asi_to_sdti-
cp/tx-rx/tx-rx (cm)” mode.
When a value outside the range supported by this unit
is output, the message “not accepted” is added.
The allowable value range is: 0
≤
num
≤
51.
For any other type, displays “--------”.
(3.1.1.20) proV1MSBstatusPictSize (Read-
Only)
Video Picture Size
Displays the picture size of the TS stream being
selected or decoded for “asi_to_sdi/asi_to_sdti-cp/tx-
rx/tx-rx (cm)” mode.
The output types supported are “720x512” “720x480”
“544x480” “480x480” “352x480” “352x240”
“720x608” “720x576” “544x576” “480x576”
“352x576” “352x288” and “Other”.
For any other type, displays “--------”.
(3.1.1.21) proV1MSBstatusRefIn (Read-Only)
Reference Input
Displays the presence or absence of reference input for
all modes.
