Sony MPS-VS500, Руководство по эксплуатации

Страница: 7 / 80

7
(EN)
Getting Started
To remove the viewer
1 Turn off the power of the unit.
2 While holding down the RELEASE button, slide the
LOCK knob fully to the right.
The viewer is unlocked and is raised slightly.
3
Remove the viewer.
Caution
Make sure to turn off the unit before removing the
viewer to avoid damaging the data of the MD.
The alarm beeps if you press the RELEASE button to
remove the viewer with the power on. First turn off the
power and remove the viewer by pressing the RELEASE
button and sliding the LOCK knob.
To turn off the unit
Press the VIEWER ON/OFF key on the unit.
The unit and the viewers are turned off and the VIEWER
ON/OFF key indicator lights in red.
To turn off the main power (MPS-
VS500P only)
Set the main power switch on the right side of the unit to
“O (off).”
To mount the viewer in the PLAYER
compartment
Remove the viewer compartment cover, and set the
viewer to the PLAYER compartment.
The setting procedure is the same as that for the
RECORDER compartment.
When two viewers are mounted
You can operate the viewers mounted in the PLAYER
and RECORDER compartments independently.
Align the
lines.
While holding
down
Slide.