Sony MPS-VS500, Руководство по эксплуатации

Страница: 19 / 80

19
(EN)
Advanced Operations
To copy onto a recorded MD
If the MD inserted in the RECORDER already contains data, “STANDBY (NO
BLANK DISC)” is displayed when the DISC COPY key is pressed. In this
case, operate as follows.
1 Press the START key.
“ALL ERASE?” appears on the RECORDER
screen.
2 Make sure that you do not need all the data in the destination MD in the
RECORDER. If you start disc copying, all the data stored in the MD will
be erased.
To cancel disc copying and check the contents of the MD, press the STOP
key.
3
To start disc copying, press the START key again.
The previous data in the MD will be erased.
4 Press any key on the unit to make “COMPLETE” disappear.
To cancel copying and replace the
MD with another one
Press the STOP key while
“STANDBY (NO BLANK DISC)” or
“ALL ERASE?” is displayed to cancel
disc copying. Then replace the MD.
Caution
If you perform disc copying on the
recorded MD, the previous data is
erased. Check the MD contents
before copying.