Sony LKRA-010, Руководство по эксплуатации

Страница: 34 / 51

34
Others
Opening/Closing the 3D
Filter
Ordinarily, the 3D filters held in the 3D filter holders open
and close on the left side of the projectors when viewed
from the front. However, depending on the operating
environment, they may be installed so that they open
outward to the left and right. In such cases, the lock pin of
the filter that opens to the right is located at the bottom of
the holder.
Standard installation
Left/right opening installation
Illustrations of a standard installation are used for the
explanations in the following sections.
Opening the 3D Filter
Pull out the 3D filter in the direction of the arrow.
Even if you pull the filter all the way out, it will not fall out
of the holder due to the lock pin.
Closing the 3D Filter
Pull the lock pin in direction A to release the lock, and slide
the 3D filter back into place.