Installation Guide
Page 46 of 53
Figure 43: Firmware update
3.Step
After a successful login the system will
look for software & firmware updates
This step can be skipped unless
advised otherwise
The system will complete the update
at a later time
Figure 44: Setting installation details
4.Step
Fill out the Owner, Installation,
Installer & Time zone details
Note that the installer needs to enter
installer accreditation number here
Figure 45: Notification settings
5.Step
Select the desired notification
settings
It is recommended to enable the
system owner offline notification
(24h)
Figure 46: Inverter settings, Country code
6.Step
For compliance with AS/NZS
4777.2:2020 please select from
Australia Region A/B/C or New
Zealand. Please contact your local grid
operator on which region to select
If required, adjust the relevant power
quality response settings using the
interface provided
DRM0 must only be activated when a
DRED device is connected
