Installation Guide
Page 33 of 53
6.3.3
Connecting power and BMS to the battery modules
Figure 18: Connecting BMS
To make the BMS connection, please use the BMS cables provided.
1.
Connect X1 (last) on the power unit to X1 terminal on the module at the back (2)
2.
Connect X2 on the module at the back (2) to X1 on the module at the front (1)
3.
Connect X2 on the module at the front (1) to X2 (first) on the power unit
Figure 19: Connecting DC power cables
Finally, connect the DC power cables provided as per instructions below:
1.
Connect the DC power cable to BATT 1 terminal on the power unit and the
battery module at the front (1)
