Installation Guide
Page 28 of 53
6.1.6
Secure enclosure to location
-
Enclosure feet can be drilled out and use anchor bolts to secure the enclosure to
the ground.
-
Use anchor points on the enclosure to secure the enclosure to a wall.
Figure 11: Enclosure anchor point
6.2
Installing electrical and data connections
6.2.1
Connecting grid and essential load wiring
Figure 12: Grid & backup wire connection
1.
Strip the L, N and PE cables 8-10mm of the grid and backup wires accordingly
2.
Connect the grid and backup supply wires into the corresponding WAGO
terminals at the back of the enclosure.
Do not drill into the main enclosure for anchor locations, metal
filings may cause irreparable damage to the storage system.
