Installation Guide
Page 23 of 53
6.1
Mounting
6.1.1
Selecting the installation location
Observe the required ambient conditions (see section 3.1 Technical data).
The installation location must be in accordance with AS 5139
6.1.2
Observing minimum clearances
Observe the specified minimum distances to neighbouring objects that are not
part of the installation as per the illustration below:
Figure 4: Minimum clearances (cm)
The minimum distances ensure that:
-
there is sufficient heat dissipation,
-
the storage system door can be opened easily and
-
there is sufficient space for maintenance work.
6.1.3
Inspecting the storage system
If there is any suspected damage or loose parts, stop installation, photograph the
affected area, and contact sonnen Australia service department.
sonnen support team
Phone: +61 137 666
Email: [email protected]
