Installation Guide
Page 19 of 53
Insulation fault when storage system is damaged
Danger of electric shock when touching damaged insulation
elements!
Unpack the storage system immediately after transport and
inspect it for transport damage.
Do not use a damaged storage system under any
circumstance.
4.2.3
Transport to the installation location
4.2.4
Temperature adjustment after transport
Forming of condensation
Damage to the storage system!
Check the inside of the storage system for condensation
before installation.
Only install the storage system if there is no condensation on
the surfaces.
If the temperature of the storage system is lower than the ambient temperature of the
room when it is delivered, condensation may form inside the storage system.
If the storage system has been transported in sub-zero temperatures, proceed as
follows:
1.
Set up the storage system in a suitable location.
High weight of the storage system
Risk of injury by lifting/dropping the storage system!
Wear safety footwear when setting up.
Ensure a secure footing.
At least two people are necessary to carry the main cabinet
of the storage system.
